HOTTAP MACHINES
Tapping Machines
- We can design specifically for your requirements.
- All Models are designed for operation upto 100 bar (1470psi) and 200 C.
- They are able to cut up to 3″ wall thickness mild steel.
- They are able to cut stainless steel, API Gr.B and API 5L X80 and concrete.
- They are capable of installing LOR and flow through plugs.
- Our machines are compatible with TD Williamson or Furmanite equipment.
- Machines have powered feed for cutting that is proportional to the spindle rpm and rapid travel.
Hydraulic Power Pack 23 HP and 38 HP Diesel
-
Compact and powerfui.
-
Our hydraulic power packs are designed to fit inside most vans.
-
The power packs are air cooled diesel engine surrounded by a protective frame ensures minimum maintenance.
Test in the workshop of Propipe Hottap Machine PTM-3070 Hydraulic, 100 Bars, 70″ Stroke, Covering range 4″ – 16″
Test in the workshop of Propipe Hottap Machine PTM-3070 Hydraulic, 100 Bars, 70″ Stroke, Covering range 4″ – 16″
PTM-1000 SERIES
Description
Tapping machines are used for making connections to pipelines, tanks, and plant piping without shut-down and are used to make hot taps in preparation for plugging machine application.
Our Models series 1000 can be either air or Manual used.
Specifications
| Drilling Capacity | Stroke | Weight | |
| PTM-1018-MN | 1/4” – 4” | 18″ | 32 pounds |
| PTM-1028-MN | 1/4” – 6” | 28″ | 41 pounds |
| PTM-1032-MN | 1/4” – 6” | 32″ | 50 pounds |
The Models 1000 Drilling Machine are available in Three versions: 1018 with 18” of travel, 1028 with 28″ and the 1032 Model with 32” of travel. However we also manufacture PTM-1000 serie for more strokes (20″ or 24″) under special requirement. They meets NACE Standard and CE, sulphide stress cracking resistant metallic material for oilfield equipment. The maximum working pressure is 1,480 psi (100 bar) at 100°F (38°C). Its operating temperatures are -20°F (-29°C) to 700°F (371°C) at 700 psi (48 bar) for intermittent service. The maximum continuous rating is 350°F (177°C) at 1,025 psi (70 bar).
For special requirements, such as higher pressure or temperature, consult the factory.
Air Motor
The air motor for TM1000 serie is optional.
Model PPM-1000 pneumatic air wrench, suitable to all our 1000 series drilling machines.
These are the technical data:
- Power: 0.6 HP
- Max Torque: 90 Nm
- Rotation Speed: 150 rpm
- Air consume: 13 l/s
- Weight: 2,35 Kg.
PTM-3000 SERIES
Propipe Hottap Machine PTM-3048 Pneumatic, 100 Bars, 48″ Stroke, Covering range 4″ – 12″
Propipe Hottap Machine PTM-3066 Hydraulic, 100 Bars, 66″ Stroke, Covering range 4″ – 16″
Propipe Hottap Machine PTM-3070 Hydraulic, Bi-Motor 100 Bars, 70″ Stroke, Covering range 4″ – 16″
Description
Tapping machines are used for making connections to pipelines, tanks, and plant piping without shut-down and are used to make hot taps in preparation for plugging machine application.
Our Models series 3000 can be either air or hydraulically used.
| Drilling Capacity | Stroke | |
| PTM-3048 PN or HYD | 3” – 12” | 48″ |
| PTM-3066 PN or HYD | 3” – 16” | 66″ |
| PTM-3070 HYD | 3” – 16” | 70″ |
Specifications
| Dimensions | Length 2100 mm, Width 500 mm, Height 536 mm |
| Weight | 337 kg |
| Mounting | 4”Class 600 RTJ Type Flange |
| Boring Bar | Chrome Plated One piece bar |
| Sealed | with Chevron Gland 400Bar at 100 Deg C |
| Tool Mounting | Industry Standard taper |
|
Tool Retention |
Manual Drawbar |
|
Max Pressure Rating |
100Bar (1480psi) |
| Spindle Speed | 40RPM with Propipe – H1515 Power Pack |
| Feed Rate | 0.07mm / rev |
| Depth Measurement | by measuring rod |
|
Drive System |
Hydraulic Motor, lubrication free CHAIN drive |
|
Hydraulics Pressure |
1750psi(118 bar)-2000psi(135bar) |
Features
The machine includes:
Lower in crank, Measuring rod, Retainer rod pusher, Ring Gasket, Bleeder valve and nipple, Motor adapter, Set of nuts, Lock-O-Ring bypass gauge.
PTM-5000 SERIES
Propipe Hottap Machine PTM-5108 Hydraulic, 100 Bars, 108″ Stroke, Covering range 14″ – 42″
Description
Tapping machines are used for making connections to pipelines, tanks, and plant piping without shut-down and are used to make hot taps in preparation for plugging machine application.
Our Models series 5000 are hydraulically operated.
| Drilling Capacity | Stroke | |
| PTM-5078-HYD | 12” – 36” | 78″ |
| PTM-5108-HYD | 12” – 42” | 108″ |
| PTM-5130-HYD | 12” – 44” | 130″ |
Specifications
| Dimensions | Length 3100mm, Height 760mm, Width 870mm |
| Weight | 990 kg |
| Mounting | 6”Class 600 RTJ Type Flange |
| Boring Bar | 100 mm Diameter Chrome Plated One piece bar |
| Sealed | with Chevron Gland 400Bar at 100Deg C |
| Tool Mounting | Industry Standard taper |
|
Tool Retention |
Manual Draw-bar sealed with Chevron Gland |
|
Max Pressure Rating |
100Bar (1480psi) |
| Spindle Speed | 25 RPM with Propipe – H3024 Power Pack |
| Feed Rate | 0.12mm / rev |
| Depth Measurement | Typical Boring Bar |
|
Drive System |
Hydraulic Motor driving spindle via HTD CHAIN ensuring lubrication and maintenance free spindle drive. |
|
Rapid Boring Bar travel |
by Hydraulic Motor |
|
Hydraulics Pressure |
1750psi(118bar)-2000psi (135bar) Max(135bar) |
Features
The machine includes:
Lower in crank, Measuring rod, Retainer rod pusher, Ring Gasket, Bleeder valve and nipple, Motor adapter, Set of nuts, Lock-O-Ring bypass gauge.
The final dimensions and weight are depending on the quality of base material, we only confirm contractually these information once we receive a firm Purchase Order form client. The general information shown above are not definitive and could vary.
PTM-7000 SERIES
Description
| Drilling Capacity | Stroke | |
| PTM-7102-HYD | 72” | 102″ |
| PTM-7130-HYD | 64” | 130″ |
| PTM-7150-HYD | 56” | 150″ |
Specifications
| Dimensions |
Length (standard machine) 3960 mm Width 975 mm Height 1130 mm |
| Weight | 1130 kg |
| Mounting Flange | 8”Class 600 RTJ Type Flange |
| Drilling Capacity | 30”- 80”Dia |
| Stroke (Standard) | 2600mm |
| Stroke (Standard) | 150mm dia Chrome bar sealed by Chevron Gland rated at 400bar at 100deg C |
|
Tool Mounting |
Taper |
|
Tool Retention |
Manual drawbar sealed by Chevron Gland rated at 400bar at 100deg |
| Max Pressure rating of machine | 100bar |
| Spindle speed | 15rpm with ProPipe H3024 power pack |
| eed rate – 0.12mm/rev fixed | 0.12mm/rev fixed |
|
Depth Measuring System |
Absolute Linear scale mounted alongside machine, No measuring rod required. Three presetable pointers. |
|
Drive System |
Hydraulic Motor to main spindle via HTD belt |
|
Rapid Boring Bar Travel |
by Hydraulic Motor |
|
Hydraulics Pressure |
118bar-135 bar |
Machine can be manufactured to any stroke length specified by the Customer, at additional cost, up to a maximum of 3700mm.
The final dimensions and weight are depending on the quality of base material, we only confirm contractually these information once we receive a firm Purchase Order form client. The general information shown above are not definitive and could vary.
