LINESTOP ACTUATORS

ACTUATOR SS MN

INFORMATION

PCM-0204  2″ – 4″  Manual LineStop Machine   &    SStop plug seter
PCM-0412 4” – 12″ Manuel Linestop Machine

SPECIFICATION

Special “O” ring flange Special “O” ring flange
Maximum Working Pressure 35 barg (490 psig) @ 82.2°C (180°F)
Maximum Working Temperature 121.2°C (250°F) @ 55.16 barg (800 psig)
Control Bar Reach 48″ (1220 mm)
Weight 35 kg (72lb)
Product Groups Liquid or Gas

ACTUATOR I HYD

INFORMATION

Item Description 4” – 12″ Hydraulic Actuator

SPECIFICATION

Mating Flanges Special “O” ring flange
Maximum Working Pressure  102 barg (1480 psig) @ 82.2°C (180°F)
Maximum Working Temperature  121.2°C (250°F) @ 55.16 barg (800 psig)
Overall Dimensions (retracted) 1829 x 360 x 185 mm (72 x 14 x 7.5 in.)
Overall Dimensions (extended) 3440 x 360 x 185 mm (136 x 14 x 7.5 in.)
Weight 135 kg (297lb)
Product Groups Liquid or Gas

ACTUATOR II HYD

INFORMATION

Item Description 14” – 20″ Jack Screw Linestop Actuator

SPECIFICATION

Mating Flanges Special “O” ring flange
Maximum Working Pressure  102 barg (1480 psig) @ 82.2°C (180°F)
Maximum Working Temperature  121.2°C (250°F) @ 55.16 barg (800 psig)
Control Bar Reach 102″  , 2641 mm
Length 135″ , 3440 mm
Weight 450 kg (992 lb)
Product Groups Liquid or Gas

ACTUATOR III HYD

INFORMATION

Item Description 22” – 34” Hydraulic Linestop Actuator

ACTUATOR III HYD 8″ CYL X 4″ ROD X 140″ STROKE 36″ CAP

SPECIFICATION

Mating Flanges Special “O” ring flange
Maximum Working Pressure  102 barg (1480 psig) @ 82.2°C (180°F)
Maximum Working Temperature  121.2°C (250°F) @ 55.16 barg (800 psig)
Hydraulic System MWP (governed by set pressure of dual cross-line relief valve fitted to control valve) 68.95 barg (1000 psig)

Maximum Mechanical Load: (Hydraulically generated mechanical thrust)

349.5 kN (78570 lbf)
Overall Dimensions (retracted) 4500 x 600 x 500 mm (177 x 24 x 20 in.)
Overall Dimensions (extended) 8100 x 600 x 500 mm (318 x 24 x 20 in.)
Weight 700 kg (1545lb)
Product Groups (as defined in the 1999 Pressure Equipment Regs.) Group 1 or Group 2, Liquid or Gas

ACTUATOR IV HYD

INFORMATION

Item Description 36” – 48” Hydraulic Linestop Actuator

SPECIFICATION

Mating Flanges Special “O” ring flange
Maximum Working Pressure  102 barg (1480 psig) @ 82.2°C (180°F)
Maximum Working Temperature  121.2°C (250°F) @ 55.16 barg (800 psig)
Hydraulic System MWP (governed by set pressure of dual cross-line relief valve fitted to control valve) 68.95 barg (1000 psig)
Weight 1320 kg (2910lb)
Product Groups (as defined in the 1999 Pressure Equipment Regs.) Group 1 or Group 2, Liquid or Gas

Let's Start Something new
Say Hello!